30-02: Dss Console Extension Assignment - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 30-02: DSS Console Extension Assignment to identify which
extensions have DSS Consoles connected.

When programming, each extension/DSS Console(s) combination is called a Console
Number. There are 32 Console Numbers (1~32). Console Numbers can be assigned
to extensions. When entering data, the assignment for Console Number 1 is normally
made first.
Input Data
Item
No.
Feature Cross Reference

2 - 422
Program 30 : DSS/DLS Console Setup

30-02: DSS Console Extension Assignment

Up to 32 different extensions with DSS Consoles can be set up. A single extension
can have up to four 60-button DSS Consoles (32 is the maximum allowed per
system).
60-button DSS Console Number
01
Extension Number
The extension number for the multiline terminal connected with the
DSS console (up to eight digits).
Conditions
None
Direct Station Selection (DSS) Console
Item
Program 30 : DSS/DLS Console Setup
UNIVERGE SV8100
01~32
Default
No Setting