Makita EB7660TH Original Instruction Manual page 11

Fig.28
► 1. Fastener
Hip belt
Optional accessory
The hip belt enables the operator to carry the tool more stably.
Fig.29
Adjusting the control lever position
For tube throttle model: Move the control handle along the swivel
pipe to the most comfortable position. Then tighten the control handle
with the screw.
Fig.30
► 1. Screw
For hip throttle model: Move the handle assembly along the swivel
pipe to the most comfortable position. Then tighten the handle with
the screw.
1
Fig.31
► 1. Screw
Adjust the angle of the control arm.
Fig.32
► 1. Control arm
Blower Operation
1
Fig.33
1. While operating the blower, adjust the throttle trigger / throttle
lever so that the wind force is appropriate for the work location and
conditions.
2. Adjusting engine speed.
For tube throttle model: Engine speed increases by pulling the
throttle trigger. To decrease the engine speed, loosen the throttle
trigger.
The cruise control function allows the operator to maintain a constant
engine speed without pulling the trigger lever. To increase the engine
speed, turn the stop control lever to high speed. To decrease the
engine speed, turn the stop control lever to low speed.
11 ENGLISH
1
1