Troubleshooting - AEG GYE01016UE User Manual

7.7 Removing the protective
anode
Protective anode
1
Remove the protective anode.
7.8 Fitting the flanged
immersion heater and
temperature controller / high
limit safety cutout

8. TROUBLESHOOTING

Certain problems are due to lack of
simple maintenance or oversights, which
can be solved easily without calling the
service technicians, before contacting
1. Insert the flanged immersion heater
into the cylinder aperture well as far
as it will go.
2. Push the combined temperature
controller / high limit safety cut-out
into the flanged immersion heater as
far as it will go.
3. Align the flanged immersion heater
and the combined temperature
controller / high limit safety cut-out in
accordance with the diagram.
1
the local service centre please carry out
the check listed below.