Set The Date, Time, Or Time Zone; Region And Language - Honeywell RT10W User Manual

•
•
•
•
If using certificates for authentication, the user must assign a password to the
active (Administrator) account.

Set the Date, Time, or Time Zone

The tablet gets the current date and time from its network connection. You can
manually set the date, time, and time zone for your location. The 24-hour clock is
turned off by default. By default, the RT10 is set to automatically update the time
and date for your current location. Use this procedure to manually set the date,
time, or time zone.
To change date and time:
1. Tap
2. Tap
3. Tap Time & Language > Date & Time.
4. Tap the toggle box for Set time automatically to turn it off.
5. Tap Change.
6. Tap the Date and Time to set each one manually.
7. Tap Change.
8. To set the time zone, select the correct time zone from the drop down list.

Region and Language

1. Tap
2. Tap
3. Tap Time & Language > Region & Language.
To add a language, there must be Internet access available to access the Windows
update site.
44
The password is stored and used when the RT10W logs onto the Administrator
account at Windows startup. The user is not prompted to enter a password.
If the user logs off, the password must be manually entered to log back onto the
RT10W.
At the logon prompt, the user could specify a different user account (and
password, if necessary) to log on, assuming the account has been added to the
RT10W.
When the RT10W is restarted, the Administrator account automatically
becomes the active user account, regardless of the active account before the
restart.
.
.
.
.
RT10W Rugged Tablet