Installing A License - Canon imagePRESS C800 Series Technical & Service Manual

Installing a license

Installing a license
For some functionality the PRISMAsync requires a separate license. The licenses are generated
by the configuration centre, and delivered as a license file. This license file has to be uploaded to
the PRISMAsync controller.
To install a license there are 2 possibilities:
Procedure
1.
Via the Operator panel
• Copy the license file to a USB stick
• Insert the USB stick into a USB port on the PRISMAsync controller. You can use any port, but
for convenience it is best to use the port on the operator panel.
• In the [System] section of the [Setup] tab choose [Local key operator settings].
• In the next window choose [Software licenses] -> [upload license]. The system will ask you for
the location of the USB stick and the filename.
• Select the correct file and touch [Start].
• After the file is uploaded restart the PRiSMAsync.
• Create a backup of the settings.
2. Via the Settings Editor
• Locate the license file on your PC.
• Open the Settings Editor
The Settings editor on page
(See
• Browse to [Support] -> [Software].
• Click [Upload license file] (Key Operator or System Administrator password required)
• Browse to the License file on your PC.
• Start the upload of the license file.
• When the file is uploaded, restart the PRISMAsync controller and the copier.
• Create a backup of the settings.
114 Chapter 9 - System software
62)