Routine Maintenance For The Multi-Functional Sensor - Huawei FusionModule5000 Maintenance Manual

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
Maintenance
Item

2.6.12 Routine Maintenance for the Multi-Functional Sensor

Table 2-26 Routine maintenance for the multi-functional sensor
Maintenance
Item
Check the
multi-functional
sensor
indicator.
Issue 01 (2019-03-05)
Maintenance Operation
Interval
Maintenance Operation
Period
Quarterly Observe the
PWR, RUN,
and ALM
indicators.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Routine Maintenance
Expected Troubleshooti
Result ng
Camera.
Standard Troubleshooti
ng
 If the green  If the PWR
PWR indicator is
indicator is off, check
steady on, whether the
the power communicat
input is ions cable is
normal. loose or
disconnecte
 If the RUN
d or whether
indicator is
the smart
off, the
ETH
power is
gateway is
abnormal. If
not
the RUN
energized.
indicator
Reconnect
blinks
the cable if
slowly, the
it is not
multi-functi
properly
onal sensor
connected.
is running
If the fault
normally. If
persists,
the RUN
replace the
indicator
cable.
blinks at

short If the RUN
intervals, the indicator
communicat blinks at
ion is short
interrupted. intervals,
check the

The ALM
communicat
indicator is
ions cable
off.
connection.
If the fault
persists,
replace the
multi-functi
onal sensor.
 If the ALM
indicator is
steady on,
37