Replacing A Water Inlet Or Outlet Temperature Sensor - Huawei FusionModule5000 Maintenance Manual

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)

5.2.10 Replacing a Water Inlet or Outlet Temperature Sensor

Prerequisites


Context
Temperature sensor can be replaced with power on.
Recommended tools: needle-nose pliers.
Preparation: maintain from the rear door.
Procedure
Step 1 Open the rear door and remove the air filters.
Step 2 Cut off the cable ties and the thermal insulation form on the pipe where the temperature
sensor is secured.
Step 3 Remove the water inlet or outlet temperature sensor probe.
water inlet and outlet temperature sensors.
Issue 01 (2019-03-05)
The water inlet or outlet temperature sensor needs to be replaced.
A spare and functional temperature sensor is available.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
Figure 5-39 shows the positions of
141