Saving Configuration In Database; To Save The Configuration Settings In The Database - Honeywell FlexLine SmartServo 954 Service Manual

COMMISSIONING
Rex AI HART
Option 9 1 1
Option 10 1 0
Option 11 0 1

7.3.10.3.2 Saving configuration in database

Part No.: 4417340 Revision 1
AO Relay
1 0
1 0
1 0
Save the configuration settings in the database to upload the same
configuration after inserting TRL/2 card in the gauge.

To save the configuration settings in the database:

1. On the Rosemount TankMaster page, select the device
(for which data must to be saved) on the left pane. For
Example: Select LT-52
2. Right click the selected device. The page appears as follow:
Service Manual
954 SmartServo FlexLine
Possible combinations of cards in
Temp
FlexLine Gauge
6 or 14 Option1: HRT-1(HART, Temp & AI as HART
input), HCI-HAO (AO) - (2 cards)
Option2: HRT-1(HART, Temp & AI as HART
input), HCI-HAO (AO), FII-RTD (Temp) - (3
cards)
Option3: HRT-1(AI1), HRT-2(AI2),HCI-HAO
(AO), FII-RTD (Temp) - (4 cards)
SMV card (Display) option 3 NOT possible
6 or 14 Option1: HRT-1 (Temp & AI1 as HART
input), HAO (AO) - (2 cards)
Option2: HRT-1 (AI1), HAO (AO), FII-RTD
(Temp) - (3 cards)
6 or 14 Option1: HRT-1 (HART & Temp), HAO (AO)
- (2 cards)
Option1: HRT-1 (HART), HAO (AO) , FII-
RTD (Temp) - (3 cards)
163