ZyXEL Communications LTE Series User Manual page 67

To configure a static route to route traffic from N1 to N2:
Log into the Zyxel Device's Web Configurator.
1
Go to Network Setting > Routing > Static Route screen.
2
Click Add New Static Route in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Type 192.168.10.2 and subnet mask 255.255.255.0 for the destination, N2.
4a
Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field.
4b
Click OK.
4c
Now B should be able to receive traffic from A. You may need to additionally configure B's firewall
settings to allow specific traffic to pass through.
Chapter 4 Tutorials
LTE Series User's Guide
67