ZyXEL Communications LTE Series User Manual page 40

Table 11 Navigation Panel Summary (continued)
LINK TAB
Routing Static Route
DNS Route
Policy Route
RIP
NAT Port Forwarding
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your Zyxel Device's IP address mapping
Sessions
DNS DNS Entry
Dynamic DNS
USB USB Service
Security
Firewall General
Protocol
Access Control
DoS
MAC Filter MAC Filter
Parental Parental Control
Control
Certificates Local Certificates
Trusted CA
Voice Voice Mode
SIP
Phone
Call Rule
Call History
System Monitor
Chapter 2 The Web Configurator
FUNCTION
Use this screen to view and set up static routes on the Zyxel Device.
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS server(s).
Use this screen to configure policy routing on the Zyxel Device.
Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
Use this screen to make your local servers visible to the outside world.
Use this screen to change your Zyxel Device's port triggering settings.
Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
Use this screen to enable or disable SIP ALG.
settings.
Use this screen to limit the number of NAT sessions each client can use.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP address.
Use this screen to enable file sharing via the Zyxel Device.
Use this screen to configure the security level of your firewall.
Use this screen to add Internet services and configure firewall rules.
Use this screen to enable specific traffic directions for network services.
Use this screen to activate protection against Denial of Service (DoS)
attacks.
Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.
Use this screen to define time periods and days during which the Zyxel
Device performs parental control and/or block web sites with the
specific URL.
Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Use this screen to view and manage the list of the trusted CAs.
Use this screen to enable the Voice Mode on the Zyxel Device.
Use this screen to set up information about your SIP account.
Use this screen to change settings that depend on the country you are
in.
Use this screen to add, edit, or remove speed-dial numbers for outgoing
calls.
Use this screen to view a call history list.
LTE Series User's Guide
40