Wps - ZyXEL Communications LTE Series User Manual

Table 33 Network Setting> Wireless > MAC Authentication (continued)
LABEL
Add new MAC
address
#
MAC Address
Modify
Cancel
Apply

7.6 WPS

Use this screen to configure WiFi Protected Setup (WPS) on your Zyxel Device.
WiFi Protected Setup (WPS) allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Select one of the WPS methods and follow the
instructions to establish a WPS connection.Your devices must support WPS to use this feature. We
recommend using Push Button Configuration (PBC) if your device supports it. See
page 126 for more information about WPS.
Note: The Zyxel Device applies the security settings of the main SSID (SSID1) profile to the WPS
wireless connection(see
Note: The WPS switch is unavailable if the wireless LAN is disabled.
If WPS is enabled, UPnP will automatically be turned on.
Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and it will turn blue.
Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Chapter 7 Wireless
DESCRIPTION
This field is available when you select Deny or Allow in the MAC Restrict Mode field.
Click this if you want to add a new MAC address entry to the MAC filter list below.
Enter the MAC addresses of the
Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is,
six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Figure 76 Add New MAC Address
This is the index number of the entry.
This is the MAC addresses of the
Device.
Click the Edit icon and type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to delete the entry.
Click Cancel to exit this screen without saving.
Click Apply to save your changes.
Section 7.2.2 on page
LTE Series User's Guide
WiFi
devices that are allowed or denied access to the Zyxel
WiFi
devices that are allowed or denied access to the Zyxel
103).
110
Section 7.11.7.3 on