computer B (in N2 network), the traffic is sent to the Zyxel Device's WAN default gateway by default. In
this case, B will never receive the traffic.
You need to specify a static routing rule on the Zyxel Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the Zyxel Device routes traffic from A to R and then R routes the
traffic to B.
This tutorial uses the following example IP settings:
Table 12 IP Settings in this Tutorial
DEVICE / COMPUTER
The Zyxel Device's LAN
A
R's N1
R's N2
B
Chapter 4 Tutorials
IP ADDRESS
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
LTE Series User's Guide
66