Initialize (Mac) Operation - Casio 120CR Service Manual

Printer model m-42v
Hide thumbs Also See for 120CR:
Table of Contents

Advertisement

1-4. Drawer List
DRAWER NAME
• DL-1838
(S type)
• DL-2768
(M type)
1-5. Option List
DEVICE NAME
• Wet cover
• INK ROLL
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according
to the manufacture's instructions.
VORSICHT !
Explosionsgefahr bei unsachgemäßem Austausch der Batterie.
Ersatz nur durch denselben oder einen vom
Hersteller empfohlenen gleichwertigen Typ.
Entsorgung gebrauchter Batterien nach
Angaben des Herstellers.
ADVARSEL !
Lithiumbatteri - Eksplosionsfare ved fejlagtig hándtering.
Udskiftning má kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandØren.

2. INITIALIZE (MAC) OPERATION

1. Set the Mode Switch to OFF.
2. Plug the power cord of the ECR off an AC outlet.
3. Remove the memory protection batteries.
4. Leave the ECR a few minutes and plug the power cord into an AC outlet.
5. Set the memory protection batteries.
6. Turn the Mode Switch to REG position.
Specification
MODEL
WT-80
IR-40
— 2 —
NOTE
Europe, UK, Germany, Other countries
Europe, UK, Other countries
NOTE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

160cr

Table of Contents