Pickup Feed System; Image Position Adjustment - Canon imageRUNNER ADVANCE 4551i Service Manual

Pickup Feed System

Image Position Adjustment

1. After setting the following service mode, press the Start key and output a test print (2-sided print) from each of the
paper sources.
• Service mode > COPIER > TEST > PG >
TYPE = 5
PG-PICK = each paper source
■ Hardware Adjustment
1. Hardware adjustment is not performed for Cassettes 1 and 2.
■ Software Adjustment
Use the following service mode to make an adjustment.
1. Left edge margin
Service mode > COPIER > ADJUST > MISC >
Service mode item
C1-ADJ-Y
C2-ADJ-Y
C3-ADJ-Y
C4-ADJ-Y
As the input value is changed by 1, the margin on the left edge of paper is changed by 0.1 mm.
2. Leading edge margin
There is no service mode setting for adjusting the leading edge margin.
3. If the service mode setting value has been changed, write down the new adjustment value on the service label.
<Reference: Standard value>
Left edge: 2.5 +/- 1.5mm
COPIER>ADJUST>MISC>xx-ADJ-Y
xx = C1/C2/C3/C4
+
-
Description of adjustment
Cassette 1
Cassette 2
Cassette 3
Cassette 4
297
5. Adjustment