Removing The Cassette Separation Roller (1/2); Removing The Main Drive Unit - Canon imageRUNNER ADVANCE 4551i Service Manual

NOTE:
When a consumable part has been replaced, be sure to clear the corresponding parts counter.
• Cassette 1 parts counter
COPIER > COUNTER > DRBL-1 > C1-FD-RL
• Cassette 2 parts counter
COPIER > COUNTER > DRBL-1 > C2-FD-R

Removing the Cassette Separation Roller (1/2)

■ Procedure
CAUTION:
Be sure not to touch the surface of the roller during the work.
1. Pull out the cassette from the host machine.
2. Open the Right Cover.
3. Remove the Cassette Separation Roller [1].
• 1 Claw [2]
NOTE:
When a consumable part has been replaced, be sure to clear the corresponding parts counter.
• Cassette 1 parts counter
COPIER > COUNTER > DRBL-1 > C1-SP-RL
• Cassette 2 parts counter
COPIER > COUNTER > DRBL-1 > C2-SP-RL

Removing the Main Drive Unit

■ Preparation
1. Remove the Front Inner
2. Remove the Developing
3. Remove the Right Rear Cover
4. Remove the Rear Cover."Removing the Rear Cover" on page 183
5. Remove the Left Rear
1x
Cover."Removing the Front Inner Cover" on page 177
Assembly."Removing the Developing Assembly" on page 252
(Upper)."Removing the Right Rear Cover (Upper)" on page 181
Cover."Removing the Left Rear Cover" on page 180
[2]
[1]
286
4. Disassembly/Assembly