Function - Canon imageRUNNER ADVANCE 4551i Service Manual

FUNCTION

FEEDER > FUNCTION
MTR-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
TRY-A4 1
Detail
Use Case
Adj/Set/Operate Method
TRY-A5R 1
Detail
Use Case
Adj/Set/Operate Method
TRY-LTR 1
Detail
Use Case
Adj/Set/Operate Method
TRY-LTRR 1
Detail
Use Case
Adj/Set/Operate Method
FEED-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Specification of DADF operation motor
To specify the motor of DADF to operate.
The motor is activated by MTR-ON.
At operation check
Enter the setting value, and then press OK key.
0 to 2
- DADF (1-path model)
0: Pickup Motor (STM2), 1: Registration Motor (STM1), 2: Read Motor (STM3)
- DADF (reverse model)
0: Pickup Motor (M1), 1: Read Motor (M2), 2: Not used
FEEDER> FUNCTION> MTR-ON
Adj of DADF Tray width detect ref 1: A4
To automatically adjust the paper width detection reference point 1 for the DADF Original Pickup
Tray. (A4)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref 2: A5R
To automatically adjust the paper width detection reference point 2 for the DADF Original Pickup
Tray. (A5R)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref 1: LTR
To automatically adjust the paper width detection reference point 1 for the DADF Original Pickup
Tray. (LTR)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref2: LTRR
To automatically adjust the paper width detection reference point 2 for the DADF Original Pickup
Tray. (LTRR)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Specify DADF individual feed operation
To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
At operation check
Enter the setting value, and then press OK key.
0 to 3
- DADF (1-path model)
0: 1-sided pickup/delivery operation, 1: Not used, 2: 1-sided pickup/delivery operation (with stamp),
3: Not used
- DADF (reverse model)
0: 1-sided pickup/delivery operation, 1: 2-sided pickup/delivery operation, 2: 1-sided pickup/
delivery operation (with stamp), 3: 2-sided pickup/delivery operation (with stamp)
FEEDER> FUNCTION> FEED-ON
847
8. Service Mode