Jumpers - Honeywell temaline TK C21P Installation Manual

Jumpers

For normal operation, configure the jumpers on the main board as
specified in Table 5.
Jumper
JP2
JP3
If the anti-opening and anti-removal tampers are present on the
board, connect
respectively. In this situation, the internal tamper does not serve any
purpose, and there is no need to replace the upper safety cover of
the unit (which can therefore be left open).
Page 16
Function
anti-opening tamper
anti-removal tamper
Table 5. Configuration of Jumpers
the corresponding
Default State
open
inserted
cables to JP2 and JP3,
INSTALLATION