Fpt-Gate-3 Extender Plate To The Backbox Installation - Honeywell Gamewell-FCI E3 Series Installation & Operation Manual

Installation

2.5.9.8 FPT-GATE-3 Extender Plate to the Backbox Installation

1. Place any of the following sub-assembly plates over the FPT-GATE-3 Extender Plate.
2. Mount any of the above Cabinet C or Cabinet D sub-assembly plates and FPT-GATE-3
Extender Plate on the studs in the backbox and secure with six (6), #10-32 nuts as shown in
Locations 1 thru 6 of the figure below.
NOTE: Install the FPT-GATE-3
Extender Plate to either the
Cabinet C, E3-ILI-C/E3-INCC-C
plates, or Cabinet D, E3-INX-C/
E3-INCC-C plates.
Figure 2.5.9.8.1 Cabinet C, FPT-GATE-3 Extender Plate to the Backbox Installation
76
Cabinet C, E3-INCC-C Plate
CABINET C, E3-INCC-C
SUB-ASSEMBLIES
PLATE (See Note)
1
3
5
E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10
Cabinet D, E3-INX-D plate
CABINET C,
BACKBOX
2
5
4
6
NUT, HEX
#10-32
6 PLACES
Cabinets
1
3
2
4
5
6
6