Makita 9561CR Technical Information page 2

R
epair
CAUTION: Unplug the tool and remove the wheel cover and grinding wheel from the machine
for safety before repair/ maintenance in accordance with the instruction manual!
[1] NECESSARY REPAIRING TOOLS
Code No. Description
1R041 Vise plate
1R217 Ring 22
1R268 Spring pin extractor 3
1R269 Bearing extractor
1R291 Retaining ring S & R pliers Removing / mounting Retaining ring S-12 from / to the drive end of Armature
1R340 Bearing retainer wrench
1R350 Ring 60
[2] LUBRICATIONS
Apply Makita grease SG No.0 and Disulfied molybdenum to the following portions designated with triangles to protect
parts and product from unusual abrasion.
Item No. Description
3 Gear housing complete Gear room
6 Spiral bevel gear 11
7 Lock ring 12
Fig. 1
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Spiral Bevel Gear 11 on Armature shaft
DISASSEMBLING
(1) In order to protect Armature's commutator, disconnect carbon brushes from the Commutator as illustrated in Fig. 2.
Fig. 2
First, remove Rear cover by unscrewing
4x18 Tapping screw.
Brush holder
Rear cover
4x18 Tapping screw
Use with Vise to protect the clamped part
Supporting Bearing box when Removing spindle from Spiral bevel gear 38
Removing Pin for Shaft lock
Removing Ball bearing 627DDW from Armature of commutator end
shaft
Removing / mounting Bearing retainer
Supporting Gear housing when removing Pin for Shaft lock
Portion to lubricate
Cylindrical portion where armature shaft
is inserted
Cylindrical portion which accepts 6 's drum
portion
M6 Hex. nut
3
6
Shift Spiral spring from
Carbon brush top.
Use for
Makita grease SG No.0.
Disulfied molybdenum
Armature
Flat washer 6
7
Disconnect Carbon brush from
commutator by pulling up.
No need to remove.
P 2/ 9
Lubricant Amount
15g
a little