Table of Contents
Advertisement
Notes
• Distortion other than the specified optical area of
the dome cover also may be appear on the
images depending on zooming, tilting or
rotation.
• When adjusting the shooting angle, please avoid
touching the exposed circuit board or ribbon
cable. Static discharge can cause damages.
3
Perform necessary adjustments such as the
image alignments on the panoramic view from
the 4 sensors.
Go to Configuration > Media > Image > Focus in
your web browser. Zoom in on the individual
lens if necessary. The automated focus
function can help you acquire the best image.
The zoom in/zoom out function is performed
in the Focus window.
4
Tighten the pan fixing screw and the tilt fixing
screw.
Tighten the screw with the tightening torque
below.
Pan: 24.5N
cm ± 1N
•
Tilt: 44.1N
cm ± 2.9N
•
Note
Tightening the tilt fixed screw with force more than
specified may cause a damage or deformation of
the screw.
cm
•
cm
•
Installing the Dome Cover
1
Replace the 2 desiccant bags on the sides of
the camera.
They remove the moisture in the dome.
Replace the desiccant every time you open the
dome cover.
2
Aim the center of the dome cover (the center of
the logo) and align with the alignment mark on
the camera body.
Aim and then turn clockwise. Install the dome
cover by fastening the T10 anti-tamper screws.
9
Advertisement
Table of Contents
