Table of Contents
Advertisement
4
Route cables through the holes.
Route cables through the routing holes, and
secure the top mounting plate to ceiling by
driving the included screws.
5
Pass an Ethernet cable through the routing
hole.
Length of the screws:
30 mm
6
6
Hook up the tether wire between the camera
and the top mounting plate.
7
Pass the Ethernet cable through the
components of the waterproof cable gland.
8
Firmly crimp the RJ45 plug to the Ethernet
cable.
Note
For attaching the connector to the network cable,
you need a crimper (RJ45).
Advertisement
Table of Contents
