Table of Contents
Advertisement
NETWORK indicator
The indicator lights up or flashes when the camera
is connected to the network. The indicator is off
when the camera is not connected to the network.
Cable gland for Ethernet
Cable gland for I/O combo cable
Note
Take care not to trap the cables between the
camera and the ceiling or the wall. If the cable is
trapped, it may cause a fire or electric shock due to
breaking.
J14 header
J9 header
Microphone contacts
RJ45 Ethernet port
Connect a commercially available network cable
(CAT5e or CAT6) to communicate with a network or
PoE* system.
For details on connection, see the Instruction
Manual of the power supply equipment.
(*PoE stands for Power over Ethernet. PoE is
compliant with IEEE802.3at.)
I/O combo cable
GPIO
+5V: I/O power supply 5V DC
DO: Digital Output (alarm output)
DI: Digital Input (sensor input)
GND: Ground
For details on each function and required
settings, see the User's Guide.
For the wiring, see "Connecting to the I/O combo
cable".
24V AC
24V AC power input
Ext. MIC IN (external microphone input) (Red)
External microphone input connector (Mini jack,
monaural)
Connect a commercially available microphone. This
jack supports plug-in-power (reference voltage
2.5V DC) microphones.
Audio Out (Green)
Connect a commercially available speaker with the
built-in amplifier.
4
Advertisement
Table of Contents
