Perfonning Shutdown Fonn Diskette - Honeywell X-Superteam XPS-100 System Operation Manual

3. SYSTEM BEING BROUGHT DOWN NOWm
Busy out
(push
down)
the appropriate phone
lines tor this system.
You. want to continue!
(y or
n)
Process accounting stopped.
Error logging stopped.
The shutdown procedure
continues with the
following messages.
By replying n, the·
procedure is interrupted.
By replying y, the procedure
issues the following messages:
All currently rlllming processes will now be killed
•••• SYSCON CHANGED TO /dev/coDSole ••••
Wait tor initl SINGLE USER MODE before halting
At this point, the procedure is complete. Before powering the
system oft, it is recommended to wait for the initialization in
"single-user" mode message to appear.
I
sync ;aync ; sync
(~~
NOT& By replying "n" in step 1, the user declines to send a message
to the other terminal Users. The system, however, sends the
following messages to each of the tenninals.
Broadcast Message from root (console) Date •• _
o
PLEASE LOG OFF NOW II
. Syitem Maintenance about to begin,
All processes will be killed in 60 seconds
All users are therefore informed of the imminent shutdown of
the system.
Performing Shutdown From Diskette
To correctly shut down the system which was initialized fr9m a
diskette, enter the following commands:
I syncJsyncJsync
Press RETURN
5