Honeywell X-Superteam XPS-100 System Operation Manual page 31

2- Enable a station processor terminal
( ' . To
enable a tenninal, type 2 and press RETURN.
·C:
1. Enable a terminal mounted on a station processor board:
Enter the name
ot
the terminal that you want to enable terminal>
<
Bnter the identifier (ttyNX) of
the port to be enabled. (See
the table "Port number to
Device Name Lines
Correspondence"). Press
RETURN.
2. These are the possible terminal typesl
a-
VIP'12xx
b-
VIP'13xx
c- VIP'laxx
d- TEKTRONIX
.e-
VTUOOIO
f- VTU0020
g-
VTU0040
I
choose one (default is type la'= YIP'l2u)T>
<
Enter the letter corresponding
to the type of tenninal you
w ish to enable and press
RETURN.
If the terminal type is VIP'12xx,
simply press RETURN.
3. Now enter the terminal baud rate (default is 9600»
<
2'1
Enter the baud rate you require
(pennisible values are 300, 1200,
2400, 4800, 9600, 19200, 38400)
and press RETURN. If the
baud rate you require is 9600,
simply press RETURN.