Advertisement
Quick Links
10260A series Auto/Manual Switch kit
Replacement/Upgrade Instructions
Document Number
Form: 62-86-33-10
Effective: 5-27-99
Supersedes: None
Summary
This kit contains a new auto/manual switch assembly for your 10260A actuator.
Procedure
See Table 1 for procedure.
WARNING
Disconnect power before accessing components inside the instrument.
ATTENTION
When working with circuit cards always protect against electrostatic discharge by wearing a grounded wrist
strap.
5/99
51309623-502
62-86-33-10 – Kit
1
Advertisement
Related Manuals for Honeywell 10260A Series
Summary of Contents for Honeywell 10260A Series
- Page 1 10260A series Auto/Manual Switch kit Replacement/Upgrade Instructions 51309623-502 Document Number Form: 62-86-33-10 Effective: 5-27-99 Supersedes: None Summary This kit contains a new auto/manual switch assembly for your 10260A actuator. Procedure See Table 1 for procedure. WARNING Disconnect power before accessing components inside the instrument.
- Page 2 Table 1 10260A Auto/Manual Switch Installation Procedure Step Action Remove lower rear cover. Remove terminal board plate. If replacing the switch, disconnect switch wires and remove switch: • Disconnect auto/manual switch wires from TB1-1, TB1-8, TB1-9, TB2-12, TB2-13, TB4-28, TB4- 29.
- Page 3 Table 1 10260A Auto/Manual Switch Installation Procedure Step Action Check switch for proper operation: • Reconnect power. • Set switch to CW and check for clockwise motion. • Set switch to CCW and check for counterclockwise motion. • Set switch to A/M and check for motion per 4-20 mA. •...