Honeywell 10260A Series Replacement/Upgrade Instructions page 3

Step
8 Check switch for proper operation:
•
Reconnect power.
•
Set switch to CW and check for clockwise motion.
•
Set switch to CCW and check for counterclockwise motion.
•
Set switch to A/M and check for motion per 4-20 mA.
•
If motion is incorrect, disassemble and check wiring in step 5. Repeat steps 6-8.
5/99
Table 1 10260A Auto/Manual Switch Installation Procedure
62-86-33-10 – Kit
Action
3