Table of Contents
Advertisement
7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide
Action
7. Select Enable Telnet, Enable FTP or
both and activate changes by pressing
Send Command.
Note: If only Enable Telnet is selected,
Telnet is enabled and FTP is disabled.
Likewise, if only Enable FTP is selected,
FTP is enabled and Telnet is disabled.
8. Network services commands are
handed to subscriber when next time
heard from. Subscriber unit may reset to
activate the changes.
A confirmation window is displayed to
indicate a command for the subscriber has
been queued.
Important: 7810iR-ent does not know or
display current status of FTP and Telnet
services.
Important: Subscriber network services
cannot be enabled/disabled from
secondary 7810iR-ent. Network services
options are disabled in secondary
7810iR-ent.
4-26
Screen Display
Hide quick links:
Advertisement
Table of Contents
