Table of Contents
Advertisement
7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide
Action
4. After the Authorized Code has been
verified, touch the Central Station button.
5. Touch the Install 7810iR button.
6. Primary receiver can be configured as
shown:
Configure all parameters:
•
•
•
•
•
7845i-ent resets as it detects change in
configuration.
4-12
Select role of This 7810iR as Primary
Select role of Other 7810iR as
Secondary if backup receiver exist
else set as Does Not Exist.
Enter IP address of backup receiver.
Listening Port is used in Private LAN
mode only. This port is programmed
into the 7845i-ent. Under normal
circumstances there is no need to
change this port.
Compass Connect Port field is used in
Private LAN mode only. Change in
value of this port must be coordinated
with changes of IP ports of other
pieces of software working in
Compass connect.
Screen Display
Hide quick links:
Advertisement
Table of Contents
