AEG THYRO-S Series Operating Instructions Manual page 9

Intended use
CAUTION
The Thyristor switch may only be employed in the sense of its purpose
of use (see the section of the chapter Safety instructions under the
same name), otherwise hazards to persons (e.g. electric shocks,
burns) and systems (e.g. overload) may occur.
Any unauthorized reconstruction and modification of Thyro-S, use of spare and ex-
change parts not approved by AEG SVS as well as any other use of Thyro-S is not
permitted.
The person responsible for the system must ensure that
- safety and operating instructions are available and observed,
- operating conditions and specifications are observed,
- protective installations are used,
- maintenance personnel are immediately notified or Thyrs-S is immediately put out
of commission if abnormal voltages or noises, higher temperatures, vibrations or
similar occur, to determine the causes.
These operating instructions contain all information required by specialists for the
use of Thyro-S. Additional information and notes for unqualified persons and for the
use of Thyro-S outside of industrial installations are not contained in these operating
instructions.
The warranty given by the manufacturer is only valid if these operating instructions
are observed and adhered to.
Warranty
No liability is assumed for employing applications not provided for by the manufac-
turer. The responsibility for the necessary measures to avoid hazards to persons and
property is borne by the operator or the user. In case of complaints, please notify us
immediately stating:
Type name
Complaint
Operating mode
36
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Production number
Ambient conditions
Duration of use