Accessories And Options; Approvals And Conformities - AEG THYRO-S Series Operating Instructions Manual

➜

12. Accessories and options

Order No. 8000 006 757
Order No. 2000 000 841
Order No. 2000 000 842
➜

13. Approvals and conformities

No product norm exists for Thyristor switches so that a useful norm structure can be
built up based on the corresponding basic norms ensuring reliable application and
comparison potential.
CAUTION
Thyristor switches are not devices for disconnection in the sense of
DIN VDE 0105 T1 and may therefore be operated only in connection
with a suitable mains isolating device (e.g. switch, isolating link).
Approvals and conformities for Thyro-S are available
• Quality standard according to DIN EN ISO 9001
• UL registration, file no. E 135074, under preparation, with consideration to
Canadian National Standard, project no. 02ME08043
• CE conformity
• Low voltage directive 73/23 EEC
• EMV directive 89/336 EEC; 92/31 EEC
In detail
Conditions for usen
Built-in unit (VDE 0160)
General requirements
Design, vertical installation
Operating conditions
Operating location, industry sector
Temperature behaviour
Storage temperature
Transport temperature
Operating temperature
56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Support for 35 mm snap-on assembly
for devices with type current 8A, 16A and 30A
Bus module Profibus DP
Bus module Profibus RTU
DIN EN 50 178
DIN EN 60146-1-1:12.97
DIN EN 60 146-1-1; K. 2.5
CISPR 6
DIN EN 60 146-1-1; K 2.2
-25°C - +55°C
-25°C - +70°C
-10°C - +35°C with external cooling (280A)
-10°C - +45°C with self air cooling
-10°C - +55°C
with reduced type current -2%/°C