Mains Load Optimization; Connecting Diagrams - AEG THYRO-S Series Operating Instructions Manual

➜

6. Mains load optimization

Thyro-S is not suitable for mains load optimization in multiple controller applications.
If mains load optimization is necessary, Thyristor controllers of type Thyro-A or
Thyro-P must be used.

7. Connecting diagrams

➜
Thyro-S can be employed in single phase switch and in three phase switches which
can be transposed to single phase switches, e.g. star connections with MP conductor
or N conductor and in open delta connection.
It is possible to apply 2 identical Thyro-S as a three phase saver circuit (with delta
load or star without N), if the triggering signal for both controllers is set up at the
same time. See Fig. 5.
46
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com