Safety Instructions - AEG THYRO-S Series Operating Instructions Manual

S A F E T Y
The following safety and operating instructions must be carefully
read before assembly, installation and commissioning.
Obligation to give instructions
The following safety and operating instructions must be carefully read before initial
assembly, installation and commissioning of Thyro-A by those persons working with
or on Thyro-A.
These operating instructions are part of the Thyristor switch Thyro-S.
The operator of this device is obliged to provide, without restriction, these operating
instructions to all persons transporting, commissioning, maintaining or performing
other work on this device.
In accordance with the Product Liability Act, the manufacturer of a product has an
obligation to provide explanations and warnings as follows:
• the use of the product other than for the intended use,
• the residual product risk as well as
• operating errors and their consequences.
The information given below must be understood in this respect. It is to warn the
product user and protect him and his systems.
Proper use
• The Thyristor switch is a component which may only be used for control and
regulation of electrical energy.
• The Thyristor switch may at most be operated using the maximum admissible
connected load according to information on the type plate.
• The Thyristor switch may only be operated in connection with a suitable and
series connected power supply disconnecting device.
• As a component, the Thyristor switch is unable to operate alone and must be
projected for its intended use to minimize residual risks.
30
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
I N S T R U C T I O N S