Antenna Adjustment - Honeywell Limitless WDRR Series Quick Start Manual

Hide thumbs Also See for Limitless WDRR Series:
Table of Contents

Advertisement

Limitless™ WDRR Series
1.9

Antenna Adjustment

The antenna of the Limitless™ WDRR and WGLA should be oriented so that they are parallel with each other. This
will in most cases allow the longest range and highest RF link strength. The least RF link strength is normally in a
direction in-line with the top of the antenna, so it is best to avoid having the antennas pointed directly toward each
other, or directly away from each other. An acceptable RF link strength is also indicated on the WDRR with five (5)
blue LEDs
.

Figure 9. Limitless™ WGLA
WARNING
RF EXPOSURE
• To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm [7.87 in] or more
should be maintained between the antenna of this device and persons during device operation. To ensure compliance,
operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
Failure to comply with these instructions could result in death or serious injury.
12
Honeywell Sensing and Control
Figure 10. Limitless™ WDRR
50063986
Issue 2,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents