Figure 5-26 Removing The Lift Motor; Figure 5-27 Display Module Disassembly - GE Giraffe OmniBed Service Manual

Right upright
Motor bracket
Lift Motor Coupler
Button head screw
Back cover
NOTE: Illustration expanded
for clarity.
10. Using a 2mm hex key, remove the 4 button head socket screws and lock washers that secure the back
cover to the display module and remove the panel.
11. Remove the control knob from the front of the display by pulling it straight off its shaft.
© 2001 by Datex-Ohmeda, Inc.. All rights reserved.
Gear box

Figure 5-26 Removing the Lift Motor

Standoff
Lock washer

Figure 5-27 Display Module Disassembly

Lift Motor
Nut bar
6600-0343-000 104
Chapter 5: Repair Procedures
Control knob
Font bezel
93