Attaching The Mac Device To The Mac Series Trolley - GE MAC 5500 Service Manual

Attaching the MAC Device to the MAC Series Trolley

Use the following procedure to attach the MAC resting ECG analysis system to the
trolley assembly.
1. Lock the wheels to prevent the trolley from rolling.
2. Remove the end panel by pulling it out and up.
3. Place the unit on the trolley surface, then slide it forward until the unit is firmly
in place and under the tab at the rear of the tray.
2046275-017G
MAC™ 5500/MAC™ 5500 HD
Installation
37