Description, Specifications, And Standard Equipment; Description; Specifications; Standard Equipment - RIDGID micro CA-300 Operator's Manual

Hide thumbs Also See for micro CA-300:
Table of Contents

Advertisement

gloves� Do not use damaged drain cleaning gloves�
Practice good hygiene. Use hot, soapy water to
wash hands and other body parts exposed to drain
contents after handling or using drain inspection
equipment� To prevent contamination from toxic or in‑
fectious material, do not eat or smoke while operating
or handling drain inspection equipment�
The information supplied with this product cannot
cover all possible conditions and situations that may
occur, and should be used in conjunction with appro-
priate training, sound judgment, and good work prac-
tices. These factors cannot be built into the product,
but must be supplied by the operator.
The EC Declaration of Conformity (890‑011‑320�10) will
accompany this manual as a separate booklet when re‑
quired�
Description, Specifications, and

Standard Equipment

Description

The nanoReel is a modern, portable SeeSnake diagnostic
reel and camera that has the flexibility and adaptability
to view small pipes, tubes, voids, and conduits� It
contains a unique, removable cable drum which makes
cleaning and replacing push cables convenient� Since
the nanoReel comes with a removable system cable, it
can be used with any SeeSnake camera control unit or
with the hand‑held micro CA‑300 inspection camera�
The nanoReel uses an advanced push cable design
and a proprietary small radius camera design which
allows camera inspection through pipes with very small
diameters, P‑traps, and very small radius bends which
conventional inspection systems often cannot inspect�
When using the nanoReel with an appropriate SeeSnake
control unit, the operator can connect an external line
transmitter and use a standard locator to line‑trace the
path of the nanoReel push cable in a pipe�

Specifications

Table 1
SeeSnake nanoReel Specifications
:
Weight
with micro CA‑300
inspection camera
without micro CA‑300
inspection camera
Dimensions:
Length
Depth
Height
Frame diameter
Camera specifications:
Length
Diameter
Sonde
Lighting
Resolution:
NTSC
PAL
Push cable:
Length
Diameter
Bend radius
Pipe capacity*
Operating environment:
Temperature
Storage temperature
Humidity
Waterproof depth
*
The nanoReel will traverse a 1 in [25 mm] straight
pipe, but its ability to go past 90‑degree turns will
depend on the material and construction of individual
pipes and joints� Test the material you intend to
inspect to ensure the camera can pass through turns
successfully� Some fittings in small diameter joints will
allow passage of the camera in only one direction�
Standard Equipment
• nanoReel
• Operator's Manual
• Instructional DVD
• Ball Guides (two sizes)
n a n o
TM
14�65 lb [6�6 kg]
9�15 lb [4�1 kg]
13�25 in [33�6 cm]
6�6 in [16�7 cm)
14�2 in [36 cm]
12�75 in [32 cm]
0�88 in [22�5 mm]
0�61 in [15�5 mm]
512 Hz
6 LEDs
656 × 492 pixels
768 × 576 pixels
82 ft [25 m]
0�25 in [6�3 mm]
1 in [25 mm]
1 in [25 mm]
32°F – 115°F
[0°C – 46°C]
−4°F – 158°F
[−20°C – 70°C]
5% – 95% RH
225 ft [70 m]
English – 5

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents