Cisco 8800 Series User Manual page 9

Procedure
Step 1 Press Applications
Step 2 Select Status > Product Information.
You can view the following information:
Product name - Model number of the Cisco IP Phone.
Serial number - Serial number of the Cisco IP Phone.
MAC address - Hardware address of the Cisco IP Phone.
Software version - Version number of the Cisco IP Phone firmware.
Hardware version - Version number of the Cisco IP Phone hardware.
Certificate - Status of the client certificate, which authenticates the Cisco IP Phone for use
in the ITSP
in the phone.
Customization - For an RC unit, this field indicates whether the unit has been customized or
not.
already retrieved its
state as Acquired.
Step 3 Press Exit to return to the Applications screen.
View the Network Status
Procedure
Step 1 Press Applications
Step 2 Select Status > Network Status.
You can view the following information:
• Network type - Indicates the type of Local Area Network (LAN) connection that the phone
uses.
• Network status - Indicates if the phone is connected to a network.
• IPv4 - IP address of the phone. You can see information on IP address, VLAN ID,
Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2
of the phone.
• IPv6 - IP address of the phone. You can see information on IP address, VLAN ID,
Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2
of the phone.
• MAC address - Unique Media Access Control (MAC) address of the phone.
• Host name - Displays the current host name assigned to the phone.
• Domain - Displays the network domain name of the phone. Default: cisco.com
• Switch port link - Status of the switch port.
• Switch port config - Indicates speed and duplex of the network port.
• PC port config - Indicates speed and duplex of the PC port.
• PC port link - Indicates speed and duplex of the PC port.
View the Phone Status
Procedure
Step 1 Press Applications
9 | P a g e
.
network. This field indicates if the client certificate is properly installed
Pending indicates a new RC unit that is ready for provisioning. If the unit has
.
.
customized profile, this field displays the Customization
Cisco IP Phone 8800 Series User Guide