Cisco 8800 Series User Manual page 10

Step 2 Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time - Total time elapsed since the last reboot of the system
• Tx (Packets) - Transmitted packets from the phone.
• Rx (Packets) - Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1 Press Applications
Step 2 Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Note
phone.
Step 3 Press Back.
View the Line Status
Procedure
Step 1 Press Applications
Step 2 Select Status > Phone status > Line status.
You can view the status of each line on the phone.
View the Transaction Status
Procedure
Step 1 Press Applications
Step 2 Select Network configuration > Ethernet configuration > 802.1X authentication > Transaction
status.
You can view the following information:
• Transaction status
• Protocol
View the Reboot History
Procedure
Step 1 Press Applications
Step 2 Select Status > Reboot history.
10 | P a g e
.
Status messages reflect UTC time and are not affected by the time zone settings on the
.
.
.
Cisco IP Phone 8800 Series User Guide