HP PageWriter XL M1705B Service Manual page 47

Setting the Date and
The main menu, shown here, allows you to set the date and the time.
Time
Auto 3x4,3R I,II,III
Report Format
Leads 04/01/1990 02:23:34PM
Note .I
w
The date format, date separators, time format, and time separators
are global configuration parameters. Changing the global
configuration is explained later in this chapter.
To set the date, press the softkey directly below the date. The date
change display appears:
Date? 04/01/1990 (MM/DD/YYYY)
Enter Clear Exit
To set the time, press the softkey below the time. The time change
display appears:
Time? 02:23:34 PM (I~H:MM:SS)
Enter AM/PM Clear Exit
Enter Stores an entry after checking its validity, then
returns you to the main menu.
AN/PM
Appears only for the time change display and only
when the cardiograph is configured for the AM/PM
time format.
Clear Clears erroneous entries and returns the currently
stored date or time to the display.
Exit
Same as Enter .
When the change display appears, the cursor highlights the first
(leftmost) digit of the date or time. To change the date or time,
simply type in the new numbers. Par example, to change the
time to 03:45:12 PM, simply type the digits 034512. The system
automatically inserts the separators in the proper places. To change
a single digit, use the left and right arrow keys, (iJ and 0, to move
the cursor over the digit you want to change. Then type the new
digit. When you are satisfied the new date or time is correct, press
Enter or Exit to store it as the cardiograph's current date or time.
2-16 Installation and Configuration