Makita 4076D Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Motor Assembly
DISASSEMBLY
(1) Disassemble Front Cover from Housing set. ( Fig. 1)
(2) Motor assembly can be disassembled as illustrated in Figs. 3 to 9.
Fig. 3
Bulb stay
Remove Dust bag (paper pack) together
with Bulb stay.
Fig. 5
Remove Rear cover by sliding toward
the direction designated with black arrow.
Fig. 7
Remove 3x16 Tapping screws from Housing set (R).
And disassemble Housing set (R).
Bind PT3x16
Tapping screw (8 pcs.)
Fig. 9
Rubber ring
Dust bag or
Paper pack
Fig. 6
Rear cover
Housing set (R)
Fan cover Motor assembly
Fig. 4
Viewed from the belly side of Product
Rear cover
connector of
Controller's Lead wires
Battery
Fig. 8
Take out Motor section, disconnecting
receptacles from Motor's terminals.
Rubber ring and Fan cover are removed
from Motor assembly,.
P 3/ 6
Removed Hanger
Hanger
Remove Hanger by
pressing the both ends.
connector
of Battery
Remove Battery from
Housing set.
Disconnect the connector
of Controller's Lead wires
from that of Battery.
Motor Section
Receptacle