1-1-4. Panel (U3)
1. Remove the panel (U7) block assembly. (Refer to Section 1-1-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-1-3.)
3. Remove the three screws, then remove the panel (U3)
in the direction of the arrow.
4. To install, reverse the removal procedure.
1-1-5. Panel (U6)
1. Remove the panel (U7) block assembly. (Refer to Section 1-1-2.)
2. Remove the fi ve screws, then raise the panel (U6) in
the direction of arrow with attention to the seven
hooks.
3. Remove the panel (U6) in the direction of arrow .
4. To install, reverse the removal procedure.
SRX-T420
Fig. 1-1-4
Screws
Hooks
Panel (U6)
Fig. 1-1-5
Panel (U3)
Screws
Hooks
Hooks
1-3