Functions Of Each Window; Common Items - Sony SRX-T420 Installation Manual

12. Check that the difference between the value measured in step 11 and the "Target Color Gamut" value
is within the margin of error ?0.005.
n
If the difference is not within the margin of error, repeat steps 5 to 11.
13. Click the [APPLY] button.

2-7. Functions of Each Window

This section describes the functions of SRX Controller required for the installation.
For about the PICTURE CONTROL window and COLOR/FRAME window, refer to the Operating
Instructions.

2-7-1. Common Items


Fig. 2-7-1a
 SCREEN CONTROL
 POWER/Location/Name/Operation Timer/Warning Info
 SCREEN CONTROL
. INPUT SELECT
Selects the input signal to be output as video signal.
- Input A: Displays the signal from DVI board (default) or optional board.
- Input B to D: Displays the signal from optional board.
- Quad-screen Mode: Displays the four signals from Input A to D in a quad-screen.
- Single 3D: This item is for 3D lens. For detail, refer to the Installation and Service Manual
of LKRL-A002/A003.
2-22

SRX-T420