Mail Report - Sony SRX-T420 Installation Manual

2-2-4. Mail Report

The sending of mail for the lamp bulb operating time and the maintenance information is set.
Fig. 2-2-4
Reporting Timing
Lamp Timer Reminder: Set the lamp lighting-up time to send the lamp notifi cation mail.
Maintenance Reminder: Set the operating (power ON) time to send the maintenance notifi cation mail.
Re-count:
Reporting Source/Destination
FROM:
Email Address:
Reporting Contents:
. Error:
. Lamp Timer/Maintenance: The lamp notifi cation mail and the maintenance notifi cation mail are
Mail Server
Outgoing Mail Server (SMTP): Type the server name or the IP address of SMTP (mail sending) server.
Requires Authentication:
. POP before SMTP:
- POP3 Server:
- Account Name:
- Password:
. SMTP Authentication:
- Account Name:
- Password:
Send Test Mail:
2-8
Place a check mark to reset the operating (power ON) time of this unit after
the maintenance notifi cation mail is sent.
Type the address of the mail sender.
Type the address of the mail destination TO and CC.
Place a check mark in the reporting contents to be sent.
The error mail is sent.
sent.
Place a check mark when the authentication is required to send the
mail. When you placed the check mark, select the following authentica-
tion method and perform the setting of authentication.
Set the authentication of POP before SMTP.
Type the server name or the IP address of the POP3 server.
Type the login name of the POP3 server.
Type the password of the POP3 server.
Set the SMTP authentication.
Type the login name of the SMTP server.
Type the password of the SMTP server.
Place a check mark when sending the test mail.
SRX-T420