2-1. Installation of SRX Controller
This unit can be operated the adjustments and setting using the supplied SRX Controller.
For about installation of SRX Controller, refer to Operating Instructions.
2-1-1. Startup
Connection
Connecting via the Ethernet
Shield case assembly (1)
n
Set the IP address of the connected computer to be assigned from DHCP.
Connecting via the RS-232C
2-2
NETWORK
connector
Fig. 2-1-1a
To RS-232C connector
RS-232C
cross cable
To RS-232C connector
Fig. 2-1-1b
Ethernet cable
(cross cable)
(supplied)
To Ethernet connector
PC
PC
SRX-T420