Makita Maktec MT961 Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Switch lever
DISASSEMBLING
Disassemble Switch lever and Switch knob. (Fig. 10)
Fig. 10
1. Blocking Switch knob to OFF position
by putting 1R281, strongly push
Switch lever as illustrated below.
1R281
Switch knob
Motor
housing
ASSEMBLING
Assemble Switch lever and switch knob. (Fig. 11)
Fig. 11
1. Insert Switch lever into Motor housing
until the hole of Switch lever comes
into sight through Switch knob
assembling hole on Motor housing.
And keep this position.
2. Linkage of Switch knob is now
disconnected from Switch lever.
Switch knob can be removed.
Switch knob
Switch lever
Switch
Switch
Rear end of
Switch lever
Motor
Switch lever
housing
Switch
2. Fit the hook of Switch Knob
knob
3. Bending Switch lever, pull it
out from Motor housing.
Switch lever
to the hole of Switch lever.
Hook of
Switch knob
Front end of
Switch lever
P 6/ 10