Related Manuals for Makita MGA400
Summary of Contents for Makita MGA400
- Page 1 INSTRUCTION MANUAL Angle Grinder MGA400 MGA450 MGA500 003565 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model MGA400 MGA450 MGA500 Wheel diameter 100 mm 115 mm 125 mm Spindle thread M10 x 1.5 M14 x 2 M14 x 2 Rated speed (n)/No load speed (n 12,000 min 10,000 min 10,000 min Overall length... -
Page 3: Grinder Safety Warnings
electric shock. before making any adjustments, changing If operating a power tool in a damp location is accessories, or storing power tools. Such unavoidable, use a residual current device preventive safety measures reduce the risk of (RCD) protected supply. Use of an RCD reduces starting the power tool accidentally. - Page 4 The rated speed of the accessory must be at or snagged and your hand or arm may be pulled least equal to the maximum speed marked on into the spinning accessory. the power tool. Accessories running faster than 12. Never lay the power tool down until the their rated speed can break and fly apart.
- Page 5 have a tendency to snag the rotating accessory and d) Do not restart the cutting operation in the cause loss of control or kickback. workpiece. Let the wheel reach full speed and e) Do not attach a saw chain woodcarving blade carefully reenter the cut.
-
Page 6: Functional Description
24. Do not touch the workpiece immediately after FUNCTIONAL DESCRIPTION operation; it may be extremely hot and could burn your skin. 25. Always be sure that the tool is switched off CAUTION: and unplugged or that the battery cartridge is Always be sure that the tool is switched off and •... -
Page 7: Operation
Installing side grip Installing or removing depressed center wheel (optional accessory) 1. Lock nut 2. Depressed centre wheel 3. Inner flange 4. Spindle 007955 CAUTION: 003959 Always be sure that the side grip is installed • 1. Lock nut wrench securely before operation. - Page 8 rounded off by use, the wheel may be worked in both A Grinding and sanding operation and B directions. Operation with abrasive cut-off / diamond wheel (optional accessory) 1. Lock nut 2. Abrasive cut-off wheel/diamond wheel 15° 3. Inner flange 4.
-
Page 9: Maintenance
If you need any assistance for more details regarding MAINTENANCE these accessories, ask your local Makita Service Center. Wheel guard (Wheel cover) For depressed center • wheel / Multi disc... - Page 12 Makita Corporation www.makita.com 884731B7...