Makita MT952 Technical Information page 4

R
epair
( 4 ) Remove retaining ring R- 32. And then, remove ball bearing 6201DDW with arbor press as illustrated in Fig. 11.
Bearing box
< 5 > Assembling gear section
( 1 ) Mount flat washer 12, and then, ball bearing 6201DDW. Secure ball bearing 6201DDW with retaining ring R-32
as illustrated in Fig. 12.
( 2 ) Mount spindle with arbor press as illustrated in Fig. 13.
( 3 ) Mount spiral bevel gear 36 by pressing the spindle which has been mounted to bearing box, with arbor press.
See Fig. 14.
( 4 ) Mount bearing box to gear housing and secure it with 4 pcs. of pan head screws M4x16 as illustrated in Fig. 15.
Bearing box
Retaining
ring R- 32
Ball bearing
6201DDW
Flat washer 12
Retaining
ring R- 32
Fig. 12
Gear housing
Spiral bevel gear 36
Bearing box
Pan head screws
M4x16 ( 4 pcs.)
Fig. 15
Round bar
for arbor
Flat washer 12
Ball bearing 6201DDW
Fig. 11
Spindle
Bearing setting
plate
Fig. 13
Round bar
for arbor
Bearing
box
Fig. 14
P 4 / 7
Spindle
Bearing
box
Spiral bevel
gear 36