Configure Clock - ABB AX400 Series User Manual

Single and dual input analyzers for pH/Redox (ORP)
AX416, AX436, AX460, AX466 & AX468

5.7 Configure Clock

Note. The Configure Clock function is available only if the option board is fitted and analog features enabled – see Section 7.3,
page 57.
-----
CONFIG. CLOCK
-----
Set Clock?
-----
mm:dd:yy
dd:mm:yy
Format
Set
-----
Day
Date 01:01:01
Set
-----
Hours
Time 12:00
-----
Press To Set
Press To Abort
Set Clock?
40
Set Clock
Set the system clock.
Return to main menu.
CONFIG. CLOCK
Option board fitted and Serial Communications feature enabled (see Section 7.3,
CONFIG. SERIAL
page 57) – see Supplementary Manual Profibus® Datalink Description (IM/AX4/PBS).
Single input analyzer and option board not fitted – see PID Control Supplement
CONFIG. CONTROL
(IM/AX4PID).
Dual input analyzer and option board not fitted – see Section 5.8, page 41.
CONFIG. SECURITY
Date Format
Select the required date format.
Date
Set the date in the format selected above.
Press to move between the day, month and year fields.
Use the and
Time
Set the time in the format hh:mm.
Press to move between hours and minute fields.
Use the and
Press to Set
Press the appropriate key to set the clock or abort the changes.
keys to adjust each field.
keys to adjust each field.
and are shown alternately on the lower display line.
Press to Abort
5 Programming
IM/AX4PH Rev. P