Programming; Security Code - ABB AX400 Series User Manual

Single and dual input analyzers for pH/Redox (ORP)
AX416, AX436, AX460, AX466 & AX468

5 Programming

5.1 Security Code

0000
SECURITY CODE
28
Note. This frame is displayed only if
5.8, page 41.
Enter the required code number (between 0000 and 19999), to gain access to the
configuration pages. If an incorrect value is entered, access to the configuration pages
is prevented and the display reverts to the Operating Page – see Section 2.3, page 6.
See Section 5.2, page 29.
CONFIG. DISPLAY
is not set to zero – see Section
Alter Sec. Code
5 Programming
IM/AX4PH Rev. P