Add Group; Edit Group - Honeywell X-618 Commissioning Manual

Figure 19 Group Settings window

Add Group

To add group：
1. Click Add button on the Group Settings window as shown in the Figure 20, the Add Group
window displays.
2. Set the group Description.
3. Click OK button to return to the Group Settings window.
4. Select the group created before.
5. Select one or more zones in the Zone Table.
6. Click
in the Group Table is used to delete the zones.
7. Click OK button to add group information.
8. Click OK button to exit the Group Setting window.

Edit Group

To edit the group:
1. Double-click the group to edit in the Group Setting window as shown in the Figure 19, the Edit
Group window displays.
2. Edit the group Description as you need.
3. Click OK button to return to the Group Settings window.
4. Select the group to edit.
5. Double-click the zone in the Group Table to edit the zone description. If not, exit it.
6. Click OK button to complete the group information edit.
20
button to add the zones to the group.